SmartDNS Not Working? A Step-by-Step Troubleshooting Checklist
You've changed your DNS settings, opened your streaming app, and you're still seeing the wrong region or an error. It's frustrating, but it's rarely a serious problem.
SmartDNS works by answering your device's DNS lookups. If anything on your device or network sends those lookups somewhere else, SmartDNS never sees them and can't help. Nearly every fault comes back to that one idea.
Work through the checks below in order. They start with the quickest fixes.
First, a quick reminder of how SmartDNS works
When you open a website or app, your device first does a DNS lookup to turn a name into an IP address. SmartDNS handles the lookups for geo-sensitive domains. It points them to UK-based SNI proxy servers, which present the right regional identity when the service runs its region check. Your actual video stream then travels directly to you at full speed.
So the goal of troubleshooting is simple: make sure the right DNS lookups reach the SmartDNS servers, and that nothing old or cached gets in the way.
The troubleshooting checklist
1. Check you've entered both addresses correctly
Your primary and secondary SmartDNS addresses are in the ticket emailed to you after you subscribe. If you use the app, they're shown there. A single mistyped digit is enough to break things, so check each address carefully.
Both addresses are needed. The service runs on two UK servers with automatic failover, so entering both keeps you connected if one is briefly unavailable.
2. Remove any other DNS servers
This is one of the most common causes. If your device lists SmartDNS alongside your broadband provider's DNS or a public resolver, it may send some lookups to the other server. Those lookups return your real region.
Make sure only your two SmartDNS addresses are listed. On iPhone and iPad, for example, the setup guide tells you to remove any existing servers after adding your SmartDNS ones.
3. Make sure you've changed the right connection
Many devices store DNS settings separately for each connection:
- Mac: Wi-Fi and Ethernet each have their own DNS settings. If you switch between them, set both.
- iPhone and iPad: DNS settings apply per Wi-Fi network. A new network means repeating the setup.
- Windows: check you edited the adapter you're actually using, not an old or inactive one.
If you have lots of devices or networks, setting SmartDNS on your router once is usually the easiest answer.
4. Clear old DNS results
Devices and apps cache DNS answers for a while. If you opened a streaming app before changing your settings, it may still be using the old answer.
- Fully close and reopen the streaming app. Don't just minimise it.
- On Windows, open Command Prompt and run ipconfig /flushdns.
- On a Smart TV, games console or streaming stick, switching it off at the wall for a minute is the simplest way to clear its cache.
- In a web browser, close every window and start again.
5. Turn off your browser's secure DNS
Modern browsers such as Chrome, Edge and Firefox can use their own encrypted DNS service, often called secure DNS or DNS over HTTPS. When it's switched on, the browser ignores your system DNS settings. Your SmartDNS settings are then bypassed entirely for anything you watch in that browser.
Look in your browser's privacy or security settings and either switch secure DNS off or set it to use your current provider. Then restart the browser.
6. Check whether IPv6 is getting around it
Many UK broadband connections now provide IPv6 as well as the older IPv4. If your router hands out IPv6 DNS servers from your provider, some lookups can travel that way and skip your SmartDNS settings.
If everything else looks right, check your router or device for IPv6 DNS settings. Consider temporarily disabling IPv6 on the device you're testing to see if it makes a difference.
7. Check your router actually saved the change
If you set SmartDNS on your router, confirm the new addresses are still showing after it restarts. Some routers have more than one place for DNS settings, such as a WAN section and a separate LAN or DHCP section. Devices may also hold on to old settings until they reconnect, so turn Wi-Fi off and on, or restart the device.
If your router doesn't let you change DNS at all, set it on each device instead. The setup guide covers Windows, macOS, Android, iPhone and iPad, routers and Smart TVs.
8. If you use the app, keep it running
If you activated SmartDNS through the app with a licence key, your public IP address is registered with the UK DNS servers while the app is running. That registration refreshes every three minutes and expires when you close the app. If streams stop working after you close the app, reopen it and give it a moment to register again. This is also worth checking if your broadband provider has recently changed your public IP address.
9. Consider location checks beyond DNS
Some mobile apps also look at your device's location services or other signals, not just the network. If a phone app still shows the wrong region after every check above, try the same service on a laptop or Smart TV. That tells you whether the issue is specific to that app.
Quick reference table
| Symptom | Likely cause | What to try |
|---|---|---|
| Works on the TV but not in the browser | Browser secure DNS is on | Turn off secure DNS and restart the browser |
| Works sometimes, not others | An extra non-SmartDNS server is listed | Keep only your two SmartDNS addresses |
| Stopped working after switching networks | DNS was set on a different connection | Repeat setup for that network, or use the router |
| Still showing the old region straight after setup | Cached DNS answers | Restart the app or device, or flush DNS |
| Stopped after closing the app | IP registration expired | Reopen the app and leave it running |
| Router settings seem ignored | IPv6 DNS or settings not saved | Check IPv6 DNS and reconfirm router settings |
Still stuck? Talk to a real person
Streaming services change how they detect location from time to time. Transcom keeps its routing tables updated so your DNS addresses don't need to change. If something has stopped working and you've worked through this list, the UK support team can help 24/7.
- Free phone: 0808 304 8316
- Email: support@transcom.net
- Or use the contact page
It helps to tell them which device you're using, which service you're trying to watch, and which of the checks above you've already tried.
Getting started with SmartDNS
If you're not yet a subscriber, SmartDNS costs £3.79 a month. There's no contract and you can cancel at any time. There's also an annual plan at £37.90 a year, which saves £7.58 compared with paying monthly. Both include UK support and access to 400+ streaming services and websites on any device that supports DNS settings.
See the plans and subscribe on the SmartDNS plans page.