Router or Device? Where to Set Up SmartDNS at Home
One of the first questions new SmartDNS users ask is where to put it. Should you set it on your router and forget about it? Or should you add it to your Smart TV, laptop and phone one at a time?
Both approaches work. SmartDNS only needs your device's DNS lookups to reach the right servers, and you can make that happen at either level. The best choice depends on how many devices you have, how much control your router gives you, and whether everyone in the house wants the same thing.
This guide walks through the options so you can choose with confidence.
The two options in brief
Every device on your network needs a DNS server to turn names like a streaming service's web address into IP addresses. Normally your router hands out your broadband provider's DNS servers automatically.
- Router setup: you replace those DNS servers on the router itself. Every device that connects then uses SmartDNS automatically.
- Device setup: you leave the router alone and enter the SmartDNS addresses in the network settings of each device you want to use it on.
Either way, you only need the two SmartDNS server addresses, a primary and a secondary, which are included in the ticket emailed to you after you subscribe.
Setting SmartDNS on your router
For most households, this is the tidiest option. You set it once, and phones, tablets, laptops, Smart TVs and games consoles are all covered without any per-device setup.
Why people choose it
- One change covers everything. New devices and visitors' devices pick it up automatically when they join your Wi-Fi.
- Ideal for awkward devices. Some streaming sticks and older TVs bury their DNS settings deep in menus, or hide them altogether. A router change sidesteps that.
- Fewer things to remember. If you reset a TV or replace a phone, you don't need to repeat the setup.
What to watch out for
- Not every router allows it. Some broadband provider routers lock the DNS settings. If yours does, device setup is the way to go.
- It affects the whole household. Everyone on the network uses SmartDNS, which is usually what you want, but not always.
- DNS settings can live in more than one place. Some routers have a WAN section and a separate LAN or DHCP section. If you run your own DHCP server, you can configure SmartDNS there too.
- IPv6 can get around it. If your router also hands out your provider's IPv6 DNS servers, some lookups may skip SmartDNS. Check for IPv6 DNS settings while you're in there.
Setting SmartDNS on individual devices
Device setup gives you precise control. You decide exactly which screens use SmartDNS and which don't.
Why people choose it
- Your router won't let you change DNS. This is the most common reason.
- You only stream on one or two devices. If everything happens on the living room TV, there's little point changing the whole network.
- Different people want different things. You might keep a work laptop on its normal settings while the family TV uses SmartDNS.
What to watch out for
- Settings are often per connection. On a Mac, Wi-Fi and Ethernet each have their own DNS settings. On an iPhone or iPad, DNS is set per Wi-Fi network, so a new network means repeating the setup.
- Remove the old servers. Make sure only your two SmartDNS addresses are listed. If your provider's DNS is still there, some lookups will go to it and return your real region.
- Browsers can override the system. Chrome, Edge and Firefox can use their own secure DNS, which ignores your device settings. If you stream in a browser, check this setting.
Side-by-side comparison
| Consideration | Router | Individual devices |
|---|---|---|
| Effort | Once, for the whole home | Repeated on each device |
| New devices | Covered automatically | Need setting up |
| Control | Whole network uses SmartDNS | You choose device by device |
| Router access needed | Yes | No |
| Best for | Busy households, lots of screens | Locked routers, one or two streaming devices |
Can you mix the two?
Yes, and plenty of people do. A common pattern is to set SmartDNS on the router for the whole home, then manually point one device, such as a work laptop, back to different DNS servers. A device's own DNS settings normally take priority over what the router hands out.
The reverse also works: leave the router alone and add SmartDNS only to the TV and streaming stick. Just be consistent, so you know where each device is getting its DNS from when something needs checking.
What about the app?
There's a third route for some users. If you subscribe through the app plans, you receive a licence key by email within five minutes. You enter it in the app and you're connected. An Android app is available as a direct download.
The app works differently from a plain DNS change. Your public IP address is registered with the UK DNS servers while the app is running. That registration refreshes every three minutes and expires when you close the app. So if you use this route, keep the app running while you stream.
A quick pre-setup checklist
- Find the ticket with your primary and secondary SmartDNS addresses.
- Decide whether you'll use the router, individual devices or a mix.
- If using the router, log in and check it actually lets you change DNS.
- Enter both addresses. The service runs on two UK servers with automatic failover, so both matter.
- Remove any other DNS servers from the list.
- Restart your streaming apps, or the device, so old cached answers are cleared.
Our setup guide has step-by-step instructions for Windows, macOS, Android, iPhone and iPad, routers and Smart TVs. If something doesn't behave as expected afterwards, the troubleshooting checklist covers the usual culprits.
Rule of thumb: if you can change DNS on your router and everyone at home streams, use the router. If you can't, or only one screen matters, set it on the device.
Get started with SmartDNS
SmartDNS unlocks 400+ geo-restricted streaming services and works on any device that supports DNS settings, including Smart TVs, Apple TV, Chromecast, Fire TV, PlayStation and Xbox. It costs £3.79 a month with no contract, or £37.90 a year on the app plans, saving £7.58 compared with paying monthly.
If you'd like help choosing the right setup, our UK support team is available 24/7 on 0808 304 8316 or via the contact page. When you're ready, see the full details and subscribe on the SmartDNS Proxy home page.